pair of condenser small-diaphragm microphones, accessories, can use Hemisphere modeling plug-in A pair of SP-1 small-diaphragm condenser microphones with cardioid directional characteristics, Apollo Channel Strip presets for instant professional sound, and included accessories.
a pair of small-diaphragm pencil microphones
condenser design
0.5" diaphragm
for stringed instruments, choirs, drums, winds, apparatus and more
natural dynamic sound
professional stereo recordings in any environment
fast and easy to achieve professional sound with Apollo SP-1 presets
free Hemisphere modeling plug-in
With a pair of SP-1 small-membrane condensers, you can record acoustic instruments, percussion, choirs and other live performances in stereo with professional-quality sound during the recording process.
The perfect pair for stereo recordingAs a paired stereo set, the SP-1 adds clarity and versatility to your recordings. Whether it's in tight X/Y spacing or further apart, combine the SP-1 the way you want and discover detail in your instrument like never before.
Capture the best sound - anywhereClassic cardioid design, high SPL sound pressure and smooth clean highs deliver consistently clear pickup for acoustic guitars, percussion, brass and more - at any volume, in any environment.
Modeling microphones with HemisphereYour microphone can now use the Hemisphere* modeling plug-in. This gives you the sound of legendary iconic and standard microphones from world-class manufacturers. See below for more details on Hemisphere*
Apollo Professional PresetsTake the guesswork and speculation out of achieving a high-end sound and use Apollo SP-1 presets. You'll get the perfect EQ settings to enhance the sound of guitar, cymbals, or boost brass and string instrument recordings - all in rich stereo sound.
features
frequency range: 20 Hz - 20 kHz
sensitivity: -38.0 (12.6 mV) ref 1 V at 1 Pa, 1 kHz
output impedance: 200 Ohms
recommended load impedance: greater than 2000 Ohms
output connector: 3-pin XLR (male)
maximum sound pressure SPL: 142 dB (at 1% THD distortion)
power supply: +48 V phantom
dimensions
12.8 cm length
diameter 2.35 cm
weight: 0.125 kg
package contains
2x microphone holder/sleeve
stereo T-bar - arm for installing a pair of microphones on one stand
2x foam wind cover
2x threaded adapter
Hemisphere Microphone Modeling*
is a free modeling plug-in for Universal Audio Standard Series microphones(SC-1, SD-1, SP-1). It uses the same award-winning technology as the UA Sphere modeling microphones to offer the authentic sound of the iconic microphones when using UA Standard Series microphones.
You can use Hemisphere in two ways:
in real time on Apollo sound cards
natively in your DAW
What does modelling offer you?
you get the sound of legendary iconic microphones - dynamic, ribbon and condenser - for free
works with any UA Standard Series microphone
benefit from the rich sound of iconic microphones from Neumann, Sennheiser, AKG and more
microphone type selection, proximity effect adjustment, filters and axis control
real-time recording "over" vintage microphones with near-zero latency on UA Apollo sound cards
plug-in application to already recorded signal in all popular DAWs
With a pair of SP-1 small-membrane capacitors, you can record acoustic instruments, percussion, choirs and other live performances in stereo with professional music album quality sound during the recording process.
The perfect pair for stereo recordingAs a paired stereo set, the SP-1 adds clarity and versatility to your recordings. Whether it's in tight X/Y spacing or further apart, combine the SP-1 the way you want and discover detail in your instrument like never before.
Capture the best sound - anywhereClassic cardioid design, high SPL sound pressure and smooth clean highs deliver consistently clear pickup for acoustic guitars, percussion, brass and more - at any volume, in any environment.
Modeling microphones with HemisphereYour microphone can now use the Hemisphere* modeling plug-in. This gives you the sound of legendary iconic and standard microphones from world-class manufacturers. See below for more details on Hemisphere*
Apollo Professional PresetsTake the guesswork and speculation out of achieving a high-end sound and use Apollo SP-1 presets. You'll get the perfect EQ settings to enhance the sound of guitar, cymbals, or boost brass and string instrument recordings - all in rich stereo sound.
features
frequency range: 20 Hz - 20 kHz
sensitivity: -38.0 (12.6 mV) ref 1 V at 1 Pa, 1 kHz
output impedance: 200 Ohms
recommended load impedance: greater than 2000 Ohms
output connector: 3-pin XLR (male)
maximum sound pressure SPL: 142 dB (at 1% THD distortion)
power supply: +48 V phantom
dimensions
12.8 cm length
diameter 2.35 cm
weight: 0.125 kg
package contains
2x microphone holder/sleeve
stereo T-bar - arm for installing a pair of microphones on one stand
2x foam wind cover
2x threaded adapter
Hemisphere Microphone Modeling*
is a free modeling plug-in for Universal Audio Standard Series microphones(SC-1, SD-1, SP-1). It uses the same award-winning technology as the UA Sphere modeling microphones to offer the authentic sound of the iconic microphones when using UA Standard Series microphones.
You can use Hemisphere in two ways:
in real time on Apollo sound cards
natively in your DAW
What does modelling offer you?
you get the sound of legendary iconic microphones - dynamic, ribbon and condenser - for free
works with any UA Standard Series microphone
benefit from the rich sound of iconic microphones from Neumann, Sennheiser, AKG and more
microphone type selection, proximity effect adjustment, filters and axis control
real-time recording "over" vintage microphones with near-zero latency on UA Apollo sound cards
plug-in application to already recorded signal in all popular DAWs
* Prekės aprašymas priklauso elektroninei parduotuvei Fotofabrikas.lt