Rapidly charge 1 or 2 v-mount batteries with the RL-CH240S from Rolux. And see the charging status of both batteries on the built-in color display. So you have optimal control over your camera or lighting batteries. Important features Rolux RL-CH240S 100 watt charging rate: both batteries are charged with up to 6A. Based on 16.8V. So your battery is ready for use very quickly. Built-in display: the screen of the RL-CH240S shows the status of both batteries. Because the screen is illuminated, you can read the status even in the dark. Universal charging: the RL-CH240S is suitable for all brands of batteries with V-mount connection. Display information RL-CH240S The color display of the RL-CH240S shows important information about the charging process. For example, you can see the battery percentage and how long the charging process takes. It also shows with a color (red, yellow, green) how full the battery is already. Even at a great distance you can see at a glance whether your battery is already (almost) full. Maximum charging speed RL-CH240S Depending on the capacity and communication of your v-mount battery, you charge with up to 100 watts. Below is the calculation: Batteries up to 100Wh: 3A per channel Batteries from 100Wh to 160Wh: 4.5A per channel Batteries over 160Wh: 6A per channel Should no communication with the battery be possible, the maximum charging rate is 3A. RL-CH240S housing The housing of the RL-CH240S is very compact. Because of the 4 legs on the bottom, you place the quick charger stably on any surface. Often even if you are only charging 1 battery. At the top is a sturdy loop, to lift the quick charger with batteries. On the front you will find a display with handy charging information. On the back you will find the C13 connector for a universal power cable. This is included. You will also find a button here to turn the charger on and off.

* Prekės aprašymas priklauso elektroninei parduotuvei Fotofabrikas.lt